Apple Servers, Xserve

Xserve is the name of Apple Computer's Macintosh 1U rackmount line of server computers. When the Xserve was introduced in 2002, it was Apple's first designated server hardware design since the Apple Network Servers of 1996. more...

Home
Apple Components
Apple Desktops
68K, Mac
Apple eMac
Apple iMac
Apple Mac Mini
Apple Power Mac
Apple Servers, Xserve
Apple Drives, Media
Apple Input Devices
Apple Laptops, Notebooks
Apple Monitors/Displays
Apple Networking
Apple Parts & Accessories
Other Apple Products
Printers, Scanners & Ink
Vintage Apple/Macintosh
Wholesale Lots

It initially featured one or two PowerPC G4 processors, but was later switched over to the new PowerPC G5, and now runs on dual dual-core Xeon CPUs. The Xserve can be used for a variety of applications, including file server, web server or even high-performance computing applications using clustering - a dedicated cluster Xserve, the Xserve Cluster Node, without a video card and optical drives is also available. If additional hard disk space is needed, its companion external RAID array Xserve RAID can be connected to it via Fibre Channel.

Xserve G4

Apple introduced the Xserve on May 14, 2002. Originally, it had one or two PowerPC G4 processors running at 1.0 GHz and supported up to 2 GB of PC-2100 memory on a 64-bit memory bus. Three FireWire 400 ports (one in front, two in rear), two USB 1.1 ports (rear), an RS-232 management interface (rear), and a single onboard gigabit port (rear) were provided for external connectivity. Two 64-bit/66 MHz PCI slots and one 32-bit/66 MHz PCI/AGP slot were provided; in the default configuration the two PCI slots were filled with an ATI Rage video card and an additional gigabit ethernet card. Up to 4 UATA/100 hard disk drives (60 or 120 GB) fit into hot-swap bays in the front, allowing software RAID-0 and 1 arrays to be created. A tray-loading CD-ROM drive was mounted in the front.

Initially, two configuration options were available: a single-processor Xserve with 256 MB of memory at $2999 and a dual-processor Xserve with 512 MB of memory at $3999. Both shipped with a single 60 GB disk and Mac OS X v10.2 \"Jaguar\" Server.

On February 10, 2003 Apple released an improved and expanded Xserve lineup. Improvements included one or two 1.33 GHz PowerPC G4 processors, two FireWire 800 ports (rear), faster memory (PC-2700), and higher capacity UATA/133 hard disk drives (80 or 160 GB). Also, the front plate was redesigned for a slot-loading CD-ROM. A new model, the Xserve Cluster node was announced at the same price as the single-processor Xserve, featuring two 1.33 GHz processors, no optical drive, a single hard drive bay, no video or ethernet cards, and a 10-client version of \"Jaguar\" server.

On April 2, 2003 the Xserve RAID was introduced, providing a much higher capacity and higher throughput disk subsystem for the Xserve.

Xserve G5

On January 6, 2004 Apple introduced the Xserve G5, a redesigned higher-performance Xserve. The 32-bit PowerPC G4s were replaced with one or two 64-bit PowerPC 970 processors running at 2 GHz. Up to 8 GB of PC-3200 ECC memory was supported on a 128-bit memory bus. One FireWire 400 port (front), two FireWire 800 ports (rear), two USB 2.0 ports (rear), an RS-232 management interface (rear), and two onboard gigabit ethernet ports (rear) with TCP offload provided greater connectivity. A 133 MHz/64-bit and a 100 MHz/64-bit PCI-X slots rounded out its expansion options. Ventilation issues restricted it to 3 SATA hot-swap drive bays (80 or 250 GB each), with the original space for the fourth drive bay used for air vents. The front plate and slot-loading optical drive (CD-ROM, DVD-ROM/CD-RW optional) were retained from the last Xserve G4.

Read more at Wikipedia.org